Home
About Us
Services to Schools
Products
Order Details
Useful Information
Links
Contact
Site Map
|
Hardware: Propellers
The BLACK PROPELLER UNIT is specially imported from
America to be used on the GYMINNIE CRICKET & FROG model aircraft. It is 15 cm diameter fitted with a hook and drive shaft and running in a Nylon bearing that mounts directly onto a 3 mm x 9.5 mm (1/8 x 3/8) motor stick. The propeller is also fitted with a freewheel clutch. Weight 3.6g (0.127 oz)
Part No. M002 £0.26p each or £8.70 for 35
The RED DART PROPELLER UNIT is the same as the black propeller except it is lighter and has thinner blades.
It is 13.8 cm in diameter and will be used by SKY HI in all subsequent Dart and Helicopter kits. Weight 2.8g (0.099 oz)
Part No. M025 £0.26p each or £8.70p for 35
SIX-INCH PLASTIC PROPELLER has a lower pitch and larger hole in its hub that makes it unsuitable for use with a rubber motor but makes it ideal to be used with a small electric motor. Weight 2.2g (0.078 oz)
Part No. M022 £0.10p each.
PLASTIC PROPELLER UNITS for rubber powered model aircraft
Each unit comprises a plastic propeller, a nose button (bearing), wire propeller shaft and two stainless steel thrust washers.
6 PLASTIC PROPELLER UNIT
The 15.24 cm (6) diameter unit shown on the left is used in the Pussycat model kit. The unit has a total weight of 3.74g (0.13 oz)
Part No. M054 £0.80 each.
8 PLASTIC PROPELLER UNIT
The 20.3 cm (8) diameter unit shown In the centre has been specially sourced for the British Model Flying Association Model Aircraft Challenge Elite Class.
Total weight 6.2g (0.217 oz).
Part No. M035 £0.95 each.
9½ GREY PLASTIC PROPELLER UNIT
The 241.3 cm (9½ ) diameter unit shown on the right is used in the P30 class of competition model.
The unit has a total weight of 6.93g (0.241 oz)
Part No. M055 £1.15 each.
Stop Press The shape of the above propellers may change as there has been a change of maker. However the quality will not change.
These are extremely light plastic propeller units made for indoor models. The 6 diameter propeller we have supplied for some time and is used in our Foam 200 and the Junior indoor model aircraft kits.
All these propellers may require FRONT BEARING M033 to mount it on to the front of the fuselage stick.
6 PROPELLER 15cm (6) diameter weighs 0.8g (0.028 oz)
Part No. M032 £0.95 each.
9 PROPELLER 23cm (9) diameter weighs 1.6g (0.056 oz)
Part No. M037 £1.30 each.
12 PROPELLER 30cm (12) diameter weighs 2.5g (0.088 oz)
Part No. M036 £1.55 each.
See also Parts
M033 & M034
Back to Products page.
| |
Black propeller unit
Red dart propeller unit
Six-inch plastic propeller
PLASTIC PROPELLER UNITS
Indoor model plastic propeller units
|
